Browsing by Author "Shaikh, Mohammad Jawed"

Now showing 1 - 5 of 5
  • No Thumbnail Available
    Item
    Design and Fabrication Of Table Top Injection Mouding Machine
    (AIKTC, 2021-05) Shaikh, Mohammad Jawed; ANSARI, MOHD IRFAN MOHD HASHIM (18DME06); KHAN, SUFIYAN HAMIDULLAH (18DME22); DHANSAY, SUFIYAN ABDUL SATTAR (15ME71); KAWCHALI, SALMAN IMTIYAZ (14ME76)
    Now a day production rate of the industries has been increasing rapidly. All the industries try to achieve the maximum result and try to improve their product qualities and product functions. To improve the quality of the entire process and raw material has to be considered and their characteristics in different conditions. This will help to attain the maximum results. The injection moulding machine is highly priced Type of machine which cost a lot of money because of this their maintenance is very important. So while testing the new composite plastic as a raw material in injection moulding machine in order to understand their characteristics, will be slightly risky because the plastic may cause the problem inside the machine because of their characteristics under different circumstances. This will damage the injection moulding machine Ultimately costing a lot of money waste in maintenance and repairing of machine. So one of the aim of this project is to check the characteristics of different types of plastic composite materials without any risk of loss of money. This machine is comparatively cheap, easy to use, low maintenance and easy to maintain. Other purpose of this project is that, the students in colleges learns the subject and topic related to manufacturing so buying costly machine to show the actual process is not possible some times. So this project will help students to do actual injection moulding operation and learn their different operations on machine at such a low cost. The following report contains the detail information about the project. The history, costing, components details, and the fabrication detail of this project. Each chapters contains the important information regarding the injection moulding machine.
  • No Thumbnail Available
    Item
    Design and optimization of cooling system in locomotives
    (AIKTC, 2017-04) Shaikh, Mohammad Jawed; Momin, Fahim (13ME29); Dalvi, Faisal (14DME127); Siddiqui, Saif (14DME143); Siddiqui, Abdulrauf (14DME142)
    In today’s competitive era efficiency means a lot therefore to optimize the cooling system we worked on various parameters that will make it more effective and optimum. In WDG-3A Loco Engine the cooling system employed is making use of Right angle Gearbox (RAGB) and Eddy current clutch (ECC) to drive Radiator Fan, these auxiliaries consumes a large amount of Engine Brake Horse Power for their operation. If this horse power is saved then it can be utilized for many other applications such as hauling of extra bogies thereby reducing brake specific fuel consumption. To achieve this we recommended Central Railway Locomotive Workshop, Parel to employ electrical system for driving radiator fan instead of using auxiliaries such as RAGB and ECC. This report focusses on the amount of horse power saved by deploying electrical system comparatively to the existing Mechanical System
  • No Thumbnail Available
    Item
    Engineering curves
    (AIKTC, 2019) Shaikh, Mohammad Jawed
  • No Thumbnail Available
    Item
    Multifunctional folding table
    (AIKTC, 2021-05) Shaikh, Mohammad Jawed; Shedge, Samar (17ME99); Verma, Abhijeet (17ME102); Verma, Ankit (17ME103); Yadav, Janardhan (17ME104)
    This report describes the design of an adjustable folding table for the home and office utility by the students of Anjuman-I-Islam Kalsekar Technical Campus. Over project is on Design and Product Development. As an engineer, we are blessed to design such kind of project which is problemsolving. Also, we concerned about costumer’s experience which aims to avoid this kind of problems with a new set of products based on ergonomics Also, we concerned about costumer’s experience which aims to avoid this kind of problems with a new set of products based on ergonomics. In this, we will be discussing the multifunctional folding table. This is compact in size and easy to handle. Also, will be cost-effective as compared to the other table available in the market. As there are lots of folding tables available in the market, but the tables we can't use in both conditions when we are sitting on the floor or chair. As the tabletop of all the tables is different like layer table, wood folding table, aluminium table, etc. The material is chosen according to their requirements. Our table includes a mechanism that can be folded in multi ways and doesn't require more space. We will also discuss the fabrication process describing the process from sketching the figure to the final product also the operation requires during the process.
  • No Thumbnail Available
    Item
    Yarn Measurement device for powerloom industry
    (AIKTC, 2022-05) Shaikh, Mohammad Jawed; Ansari, Mohammed Amir Wasiuddin (18ME08); Chowdhary, Mohammed Kaif (18ME17); Bhanpurwala, Ismail Shabbir (18ME28); Khan, Rafique Rasheed (18ME41)
    The yarn measurement device is uesd to measure the length of thread on which worker salary is depend.the thread get wounded on a wooden circular rod known as shedding.due to slow in production and lack of development till now thread is measured manually which is time consuming. For this we are making this device which measure the length of thread by it’s own and there will be no chances of mistake and manipulation. The objective of this project are as follows: 1. Design and assembly of machine 2. Design of winder 3. Scope of the machine in future Keywords: Winder, Mechanical COUNTER,Q shaded motor.