Research - Dept. of Mechanical Engg.

Permanent URI for this collection

http://aiktc.ndl.gov.in/handle/123456789/3545

Browse

Browsing Research - Dept. of Mechanical Engg. by Subject "Student Publication - ME"

Now showing 1 - 19 of 19
  • No Thumbnail Available
    Item
    Design and Fabrication of Automated Chiselling Machine
    (IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 2016-05) Kazi, Javed; Jankar, Ganesh (12ME20); Dadas, Suraj (12ME11); Sable, Sagar
    Nowadays world is focusing into automation in industrial field each and every work of human is reduced by machine. Machining is term use to describe a variety of material removal processes in which cutting tool removes unwanted material from a work piece to produce a desired shape. The objective of this project is to make Rough surface on Trestle box which will enables it to grip the jaws of Hydraulic jack to lift the heavy metallic sheets for making an storage tank with very less involvement of worker. So this project is aim to remove material from Trestle boxby different machining processes in order to reduce human fatigue, with increased quality of product.
  • No Thumbnail Available
    Item
    Design and Fabrication of Domestic Hydro Turbine
    (International Journal of Latest Technology in Engineering, Management & Applied Science (IJLTEMAS), 2017-03) Motiwala, Nawaz; Kothavale, Ashlesha (13ME01); Salunkhe, Sonal (13ME02); Wadkar, Pooja (13ME03)
    Day by day the demand of electricity increases, due to growing population & commercialization. The power consumption is more than generation by conventional method. Hence, hydroelectricity exist as one of the option to meet the growing demand for energy by nonconventional method. The performance of hydro turbine is strongly influence by the characteristic of water inertia. So in this paper we are attempting the way of micro generation of hydropower for domestic purpose.
  • No Thumbnail Available
    Item
    Design and fabrication of domestic wind turbine
    (Novateur Publications, 2017-02) Motiwala, Nawaz; Shaikh, Ilyas; Jagidar, Danish (14DME129)
    The continuous increase in demand of electricity makes it necessary for everyone to have its availability and also during power cut-off. For this, people are moving towards the renewable energy sources. Because of its reversibility, the process ishighly demanding. Wind is one of the most important renewable energy which drags and sparks the houses because of non-conventional energy sources. Since wind produces power in a cubic relation with the wind speed, people conscience towards the wind sources has increased and also it is free of cost and doesn’t emit any greenhouse gases. In this study, we elucidate the wind energy for power generation at domestic level of use at optimum rate so that people will be benefited through its use.
  • No Thumbnail Available
    Item
    Design of mini CNC using arduino uno
    (Fast Track Publications, 2019-04) Mukadam, Wasif (16DME162); Qureshi, Md. Siddique (16DME166); Siddiqui, Sakib (16DME181); Tungekar, Md. Rameez (16DME183); Hirani, Aslam
    n manufacturing sector the CNCtechnology is most widely used machine. The CNCthat involves interfacing of computer for controlling the machining process. The CNC stands for computer numerical control . This paper gives idea about the CNC engraving machine using Arduino uno. The purpose ofthismini cnc is to engrave on Acrylic materials with anaccuracy and that to be within a low cost. The device is capable of functioning with the computer for defining the cutting geometry. The software is used for controlling the motion of the machine is universal gcode sender (UGS) and defining the geometry of a particular engraving on material the software to be used is inkscape.
  • No Thumbnail Available
    Item
    Implementation of 5S Practices in a Small Scale Organization: A Case Study
    (International Journal of Engineering and Management Research, 2015-04) Shaikh, Saad; Ansari, Noor (11ME11); Sawant, Ishtiyak (11ME47); Sayyed, Ziaul (11ME49); Khan, Naseem (11ME31)
    A small scale industry plays an important role in Indian economy. In an organization the prime importance is given to the quality and productivity. Since a problem come across due to the defects in materials, down time in production, working conditions, housekeeping etc. This case study deals with the 5S implementation in an industry, Implementation of 5S can result in considerable improvements in environmental performance beside with improved housekeeping and health and safety.[5]5S can improve the quality, productivity and working conditions in organizations.
  • No Thumbnail Available
    Item
    Implementation of manual process planning methodology for production
    (Journal of Emerging Technologies and Innovative Research (JETIR), 2019-03) Mulla, Md. Rehan (16DME163); Mullaji, Daniyal (16DME164); Sandhi, Taha (16DME167); Shaikh, Watique (16DME179); Gandhi, Asif
    Process Planning is the technique of setting a sequence of operations for converting the raw material into finished product. In this paper, method of manual process planning has been described briefly and the focus is kept on the Batch Production. In small scale and medium scale industries, this technique of process planning is not implemented. A case study of aerospace parts manufacturing company has been discussed. This paper recommends the necessary action related with process planning which should be taken by the company. The sequence of operations performed there depends on the skills of the worker, availability of machines and time available which has nothing to do with the proper utilization of facility available. With the prior knowledge of Process Planning in production and various of its relative factors like machining, management of idle time of machines and cost estimation can be done effectively. By giving keen attention on the selection of machining facility, tools and jigs and fixtures, complex operations are carried out efficiently. This paper also discusses about the perfect utilization of available facility and provides recommendations for reducing the unnecessary time involved in setup time.
  • No Thumbnail Available
    Item
    Implementation of systematic plant layout (SPL) at Hitesh Mechanical Pvt. Ltd.
    (Journal of Emerging Technologies and Innovative Research (JETIR), 2019-02) Shaikh, Aftab (15ME102); Khan, Abdurrasheed (15ME80); Baranwal, Prince (15ME66); Ansari, Usama (15ME64); Ghazi, Altamash
    The purpose of this paper is to study the Plant layout of Hitesh Mechanical Pvt Ltd., New Mumbai using on SPL (Systematic Plant Layout) technique to improve the inventory management system for raw materials, scrap management and process planning for different operation on the work floor. Aim of this study is to improve the productivity by minimizing the idle time. Firstly, the problem in terms of storage, material flow is identified. In this paper the initial layout and the alternative layout is being designed based on the SPL methods, Activity relationship charts, From-to chart and algorithms like CRAFT, CORELAP. The SPL method help us to find the solution and increase the productivity and the storage capacity of the plant.
  • No Thumbnail Available
    Item
    Improvisation of single car rake test RIG (RTR) used to test braking system in train coaches
    (Journal of Emerging Technologies and Innovative Research (JETIR), 2019-04) Shaikh, Mustaq (15ME104); Raeen, Saddam (15ME91); Suddique, Rameez (15ME113); Raza, Md. Nadeem (15ME93); Shaikh, Rizwan
    The air brake is the standard train brake used by railways all over the world. To test the braking system of single car a Rake test rig is used. It is based on the simple physical properties of compressed air. The Rake Test Rig performs the braking test at Twin Pipe Braking system of coaches. Rake Test Rig used has two pressure gauges that are Feed pipe gauge and Brake pipe gauge. The existing test rig used at workshop has number of conventional joints, complex construction and its weight. In this paper the improvement in rake test rig construction is implemented to overcome the existing problems and the brake testing procedure is also studied. The improved design and construction made the test rig more accurate than existing and problems were found to be completely resolved.
  • No Thumbnail Available
    Item
    Kinematic and Dynamic Modeling of a Quad copter following a trajectory using MATLAB
    (International Journal on Recent and Innovation Trends in Computing and Communication, 2016-04) Thavai, Rahul; Shaikh, Altamash(12ME48); Syed, Adnan (12ME62); Padwekar, Aamir(13ME133)
    Our task comprises of plotting different yields of kinematic and element movement concerning time. This yield is acquired by making a quad copter to follow an endorsed direction in the MATLAB ra13 reenactment stage. The focal point of the mass of the quad copter is kept up at the focal point of the quad copter and the accompanying administering kinematic and element mathematical statements are readied. These comparisons inferred are utilized for the beginning of the kinematic and element displaying of the quad copter made to follow the direction. The yields of the kinematic and element demonstrating are made the data for the amendment of blunder info and tuning of the PID control framework. This shut capacity PID control framework is utilized for the adjustment of the quad copter while taking after a given direction and advance the yield of the kinematic and element demonstrating process for tuning reason for the control.
  • No Thumbnail Available
    Item
    Kinematic and Dynamic Modeling of a Quadcopter following a trajectory using MATLAB
    (Vishwatmak Om Gurudev College of Engineering, 2016-04-09) Thavai, Rahul; Shaikh, Altamash(12ME48); Syed, Adnan (12ME62); Padwekar, Aamir(13ME133)
    Our project consists of plotting various outputs of kinematic and dynamic motion with respect to time . This output is obtained by making a quadcopter to trace a pescribed trajectory in the MATLAB ra13 simulation platform.the centre of the mass of the quadcopter is maintained at the centre of the quadcopter and the following governing kinematic and dynamic equations are pepared. These equations derived are used for the inception of the kinematic and dynamic modelling of the quadcopter made to trace the trajectory. The outputs of the kinematic and dynamic modelling are made the input for the correction of error input and tuning of the PID control system. This closed function PID control system is used for the stabalization of the quadcopter while following a given trajectory and optimize the output of the kinematic and dynamic modelling process for tuning purpose of the control. Index Terms - List key index terms here. No mare than 5.
  • No Thumbnail Available
    Item
    Literature Review for Design of Elliptical Bicycle
    (International Journal of Science, Engineering and Technology Research (IJSETR), 2016-01) Shaikh, Saad; Shaikhnag, Yasser (12ME59); Surangiwala, Mohd. Hawwaad (12ME61); Shaikh, Falak (12ME02); Khan, Saniya (12ME01)
    Customization design is a trend for developing a bicycle in recent years. Thus, the comfort of riding a bicycle is an important factor that should be paid much attention to while developing a bicycle. From the viewpoint of ergonomics, the concept of “fitting object to the human body” is designed into the bicycle frame in this study. Firstly the important feature points like riding posture, frame design, wheel size, materials required, method of manufacture and types of failures are discussed. Further this study proposes a detailed methodology which is helpful for the designer to develop an elliptical bicycle in an efficient and economical manner.
  • No Thumbnail Available
    Item
    Review of 5S Technique
    (International Journal of Science, Engineering and Technology Research (IJSETR), 2015-04) Shaikh, Saad; Ansari, Noor (11ME11); Khan, Naseem (11ME31); Sayyed, Ziaul (11ME49); Sawant, Ishtiyak (11ME47)
    There are certain fields which are very demanding in today's trend. Small Scale Industry is one of the field. It plays an important role in Indian country. It has emerged as powerful source in providing relatively larger employment after agriculture. It contributes more than 50% of the industrial production in vast field of engineering .Global markets are continuously changing and demanding due to high quality and low cost. Such products can be produced using lean manufacturing , by this we aimed to reduce all types of wastes at product manufacturing so as to reduce product cost. 5S is a basic lean manufacturing technique for cleaning, sorting, organizing and providing necessary improvement in work place. This system helps to organize a workplace for efficiency and decrease waste and optimize quality and productivity via monitoring an organized environment[1]. 5S offers good results for required improvement. This method can be used in all companies , by this we can get good improvement in the production process of company. Consequently, 5S techniques would strongly support the objectives of organization to achieve continuous improvement and higher performance.
  • No Thumbnail Available
    Item
    Review on Six Sigma (DMAIC) Methodology
    (International Journal Of Modern Engineering Research (IJMER), 2015-02) Shaikh, Saad; Kazi, Javed
    The growth rate of fair-size institutions and Organization is directly related to the implementation of Six Sigma Methodology. This paper consists of detailed analysis regarding application of six sigma Methodologies in Organizations and Institutions. This paper provides an overview to the literature into various categories and considers various methods/techniques suggested in the literature. Based on the review, avenues for further research are also discussed.
  • No Thumbnail Available
    Item
    Review paper on design and analysing of different types of fin configurations
    (International Journal of Research and Analyticl Reviews (IJRAR), 2019-03) Shaikh, Rizwan; Shaikh, Mubashshir (16DME175); Shaikh, Yusuf (16DME172); Shaikh, Fatru (15ME100); Shaikh, Danish (15ME99)
    This paper investigates the work done on various types of fins effect of perforation shape or geometry on the heat transfer of perforated fins.The type of heat ex-changer used is heat sink with the perforated fins under the forced convection heat transfer to determine the performance for each perforation shape between straight, slanting, transverse,circular, rectangular, triangular,cylindrical,square and also with the non-perforated fins. The experimental result compared between the types of fins perforation shape and the heat transfer coefficient to clarify the best perforation shape for the plate heat sink. The fluid and heat transfer properties of various fins were studied which found out were using CFD,ANSYS,CATIA .The difference between experimental and numerical results was reported for temperature distributions when the power supplied are respectively.The overall conclusion shows various paper analyzed and their results and tabulated and also shown in the graphical format.
  • No Thumbnail Available
    Item
    Review Paper on the Surface Optimization of Aluminium Alloy in Milling
    (International Journal for Scientific Research & Development|, 2016-04-01) Shaikh, Rizwan; Pawaskar, Saif (13ME134); Firfiray, Bilal (13ME129); Khan, Abdul (11ME29); Hafiz, Yusuf (12ME15)
    The demand for high strength and low weight material in aerospace industries is found to be increasing in fabrication of structures and equipments of aircraft and space satellites. Aluminium alloys possess the characteristics of lightweight and high strength. The identification of the optimum values of input parameters to achieve better surface finish as response parameters. The Aluminium 7075 T651 is worked on the End milling process on the HAAS CNC machine. Different parameters of Cutting Speed, Feed, and Depth of Cut in the Orthogonal Array method using Taguchi method. The results are to be worked on the DOE method on software MINITAB. The material can further be worked upon different input parameters on various machines and for different response parameters. For carrying out the above-mentioned process various papers were referred for guidance and knowledge in the same field of previously carried experiments and results. Various technical concepts and tools like The Taguchi, Orthogonal Array, DOE, ANNOVA, Fuzzy Logic, and Response Parameters etc were learned from the Published papers and it helped extensively in gaining knowledge required for the experiments to be performed on our project.
  • No Thumbnail Available
    Item
    Static Analysis of Go-Kart Chassis by Analytical and Solid Works Simulation
    (International Journal of Modern Engineering Research (IJMER), 2015-04) Thavai, Rahul; Kazi, Shahezad Faisal (11ME28); Mirza, Shahrukh Ajaz(11ME37); Mukri, Hassien Arman(11ME39); Khan, Imran Jamil (11ME53)
    This paper aims to do modelling, simulation and performing the static analysis of a go kart chassis consisting of Circular beams. Modelling, simulations and analysis are performed using 3-D modelling software i.e. Solid Works and ANSYS according to the rulebook provided by Indian Society of New Era Engineers (ISNEE) for National Go Kart Championship (NGKC-14).The maximum deflection is determined by performing static analysis. Computed results are then compared to analytical calculation, where it is found that the location of maximum deflection agrees well with theoretical approximation but varies on magnitude aspect.
  • No Thumbnail Available
    Item
    Study and implementation of 5S at Hitesh Mechanical Pvt. Ltd
    (Journal of Emerging Technologies and Innovative Research (JETIR), 2019-02) Shaikh, Aftab (15ME102); Khan, Abdurrasheed (15ME80); Baranwal, Prince (15ME66); Ansari, Usama (15ME64); Ghazi, Altamash
    Hitesh Mechanical Pvt. Ltd. (MIDC Rabale), aims to improve the productivity and optimization of available resources at their disposal. The purpose of this paper is to study, analyze and propose the 5S system at Hitesh Mechanical Pvt. Ltd and try to improve the system to decrease the improper management of the facility and to decrease the material wastage. At the starting a survey is conducted to make records what are the current management scenario in the facility regarding the tools, equipment, and material handling and track of orders and schedule of the maintenance.
  • No Thumbnail Available
    Item
    Study and implementation of 5S method at Mechmann Engineering Pvt. Ltd.
    (International Journal of Research and Analyticl Reviews (IJRAR), 2019-02) Ali, Md. Afreed (15ME62); Siddiquie, Mahefuzur (15ME115); Sojar, Hussain (15ME76); Yadav, Ravipratap (15ME120); Kazi, Javed
    The main desireof thispaper tostudyremedythe productiveness, efficiency and housekeeping of available resourcesat Mechmann Engineering Pvt. Ltd. And try to reducing variationand decrease the material waste.This paper focusedthe step by step administrationground ruledemandedfor robustpracticeof 5sas a part of the daily management.It describesthe idea to implement each and every base of 5s methodology-Seiri, Seiton, Seiso, Seiketsu and Shitsuke in the industry in continuityto bring about a broadperfectionin its performance
  • No Thumbnail Available
    Item
    Study and implementation of KAIZEN method at Mechmann Engineering Pvt. Ltd.
    (Journal of Emerging Technologies and Innovative Research (JETIR), 2019-03) Ali, Md. Afreed (15ME62); Siddiquie, Mahefuzur (15ME115); Sojar, Hussain (15ME76); Yadav, Ravipratap (15ME120); Kazi, Javed
    The importantpurposeof thispaper tostudytheremediation ofthe production, efficiency and accuracyof accesssustainabilityat Mechmann Engineering Pvt. Ltd.the Kaizen method of continuous betterment through small steps, of efficient effect of industry.This paper concerned onthe improvements that can give lower renunciationlevel of the productsand increase the productivity with high quality.Here issome modification by implementing this in same company the quality of product can be improved. The Kaizenorganizationdepictsa solid, tacticaltool, with a perspectiveto moveand transcendthe company’s desires